Flexco Product Browser
220Total
220Scraped
0Pending
6 matching products
Clear
Inspection Doors
Features: Adjustable latch mechanism - Tightness of door seal can be changed as needed by simply adjusting the nuts on the U-bolt; Lockable design - A padlock can be placed through the latch and door gusset to prevent unauthorized users from accessing the chute/enclosure; Silicone seal on door - Helps provide a tight seal between the door and mounting plate; Dust-tight seal to chute/enclosure wall - Doors are supplied with silicone sealant for a dust-tight seal between the mounting plate and the chute or enclosure wall; Available with or without screen Specifications: Powdercoat Mild Steel or 304 Stainless Steel; Belt widths 24" to 60" (600 to 1500 mm)
Spray Poles
Features: Spray nozzles are angled 45 degrees to the belt for a high pressure, low volume spray; Suspends fines, making belt cleaning easier and extending blade life; Easy-to-install system built for durability and minimal maintenance Specifications: Stainless steel pole with powder coated steel clamping brackets; Spray nozzles are spaced on 12" (300 mm) centers; Delivers .98 gallons (3.7 liters) per minute at 60 psi (414 kPa); Generally will affect moisture content of material by less than .5%; Maximum inlet pressure is 300 psi (2069 kPa).; Typical pressure setting is 40 - 60 psi (276 - 414 kPa).
Stabilizing Rollers
Features: Designed to hold the belt flat and stable, so cleaner blades can make optimal belt contact; For use in applications with belt cup or belt flap; By preventing these issues, secondary cleaner performance and blade/tip life is enhanced Specifications: Stabilizing Roller Bracket Kit: Can adjust horizontally and vertically to fit any conveyor For use with your own on-site return roller Roller retainer slots built into both the upper and lower portions of the brackets so return roller height can be adjusted; Live-Shaft Hold-Down Roll: HDR bracket kit allows vertical adjustment Overall roll length is belt width + 6" (150 mm) and overall shaft length is belt width + 30" (750 mm)