Flexco Product Browser

Far-Pul™ HD® Belt Clamps

Belt Clamps Scraped Design: Clamp bars with adjustable steel scissors, retaining pins, and clamp bar pins Belt type: Rubber-covered and PVC heavy-duty Load capacity: 3 tons (2.7 metric tons)

Belt Clamps Scraped Design: Clamps over belt; extruded non-slip grip pattern Belt type: Solid woven PVC/PVG or rubber-cover plied belting; flat, sidewall, chevron, etc. Belt thickness: 2” to 2.25” (50 mm to 55mm)

SmartClamp™ Belt Clamps

Belt Clamps Scraped Design: Four clamps; wedge grip; large impact plate Belt type: Light-duty Belt thickness: up to 5/16” (8 mm)

900 Cutter

Belt Cutters Scraped Design: Single-sided clamp with enclosed blade; cambered bottom beam Belt type: Thick and hard carcass Belt thickness: up to 1.5” (38 mm)

900 Series Belt Cutter Skiver

Belt Cutters Scraped Belt Type: Rubber & PVC/PVG Cutting Overall Belt Thickness: Rubber: Up to 1-1/2" (38 mm) PVC/PVG: Up to 5/8" (16mm) Cutter Assembly Width: Belt width + 12-1/2" (318 mm)

Power Belt Cutters

Belt Cutters Scraped Design: Corded and Cordless power cutters with spring-loaded blade guard Belt type: All types Belt thickness: up to 2” (50 mm)

840 Cutter

Belt Cutters Scraped Design: Single-sided clamp with enclosed blade; cambered bottom beam Belt type: PVC Belt thickness: up to 1” (25mm)

Clipper® 845 Belt Cutter

Belt Cutters Scraped Design: Fully-enclosed flat-top blade design Belt type: Thick and hard carcass Belt thickness: up to ½” (12 mm)

300 Series Belt Cutter

Belt Cutters Scraped Design: Double-edged blade that cuts in either direction Belt type: Thick and hard carcass Belt Width: 12” to 60” (300 to 1500 mm)

14" Belt Cutter

Belt Cutters Scraped Design: Built-in belt squaring arm, hinged top beam for insertion of belt, solid steel handle, base, and top beam Belt type: Thick and hard carcass Belt thickness: up to 3/8” (10 mm)

#25 Belt Cutter

Belt Cutters Scraped Design: Small, lightweight, and portable Belt type: Laundry tapes Belt thickness: up to 1/8” (3 mm) laundry tapes

Flex-Lifter™ Belt Lifter

Flex-Lifter™ Belt Lifter Scraped Flex-Lifter ™ Belt Lifter: Highest safe lift rating available; For belts tensioned up to the stated ratings with widths from 36” – 96” (900 – 2400 mm); Provides plenty of vertical room –– from 14” – 16” (350 – 400 mm); Adjustable wings make lifting troughed or flat topside belts easy; Portable enough to be carried to job site and placed on the conveyor structure; Extension legs can be used in two positions for higher or lower placement; Works with standard CEMA and common underground conveyor structure and idler types; 3 Sizes Medium- 36"-60" (900-1500mm) Large 48"-72" (1200-1800mm) XL 72"-96"(1800-2400mm) Why Flex-Lifter ™ ?: Highest safe lift rating available; For belts tensioned up to the stated ratings with widths from 36” – 96” (900 – 2400 mm); Provides plenty of vertical room –– from 14” – 16” (350 – 400 mm); Adjustable wings make lifting troughed or flat topside belts easy; Portable enough to be carried to job site and placed on the conveyor structure; Extension legs can be used in two positions for higher or lower placement; Works with standard CEMA and common underground conveyor structure and idler types; 3 Sizes Medium- 36"-60" (900-1500mm) Large 48"-72" (1200-1800mm) XL 72"-96"(1800-2400mm)

FSK™ Belt Skiver

FSK™ Belt Skiver Scraped FSK ™ Belt Skiver: Portable and lightweight; Manual or power operation that precisely removes top covers in a single pass; Available in two sizes to skive belts between ¼” (6.5 mm) and 1.25” (32 mm) thick and 7/8” (22.5 mm) and 1.75” (44.5 mm) thick.; Adjusts easily for cutting depths from 1/16" (1.5 mm) to 3/8" (10 mm)-extra-deep skives can be achieved with multiple passes; Front drive rollers aggressively grip belt at the start of the skive to prevent slippage; May be used on new, worn, or damaged belt surfaces; Fence adjusts to appropriate fastener size Why the FSK ™ Belt Skiver?: Portable and lightweight; Manual or power operation that precisely removes top covers in a single pass; Available in two sizes to skive belts between ¼” (6.5 mm) and 1.25” (32 mm) thick and 7/8” (22.5 mm) and 1.75” (44.5 mm) thick.; Adjusts easily for cutting depths from 1/16" (1.5 mm) to 3/8" (10 mm)-extra-deep skives can be achieved with multiple passes; Front drive rollers aggressively grip belt at the start of the skive to prevent slippage; May be used on new, worn, or damaged belt surfaces; Fence adjusts to appropriate fastener size