Description
RMC1 Skirt Clamps provide a cost-effective solution to material spillage problems in your conveyor loading zones. A good material containment system at the loading point reduces conveyor problems and saves cleanup costs.
Variations (12)
76538
| Skirt Rubber Thickness Range (in.) | 5/16-3/4 |
|---|---|
| Skirt Rubber Thickness Range (mm) | 8-19 |
76415
| Skirt Rubber Thickness Range (in.) | 5/16-3/4 |
|---|---|
| Skirt Rubber Thickness Range (mm) | 8-19 |
75834
| Skirt Rubber Thickness Range (in.) | 5/16-3/4 |
|---|---|
| Skirt Rubber Thickness Range (mm) | 8-19 |
75836
| Skirt Rubber Thickness Range (in.) | 5/16-3/4 |
|---|---|
| Skirt Rubber Thickness Range (mm) | 8-19 |
75832
| Skirt Rubber Thickness Range (in.) | 5/16-3/4 |
|---|---|
| Skirt Rubber Thickness Range (mm) | 8-19 |
75817
| Skirt Rubber Thickness Range (in.) | 5/16-3/4 |
|---|---|
| Skirt Rubber Thickness Range (mm) | 8-19 |
75833
| Skirt Rubber Thickness Range (in.) | 5/16-3/4 |
|---|---|
| Skirt Rubber Thickness Range (mm) | 8-19 |
76414
No variation attributes.
75820
No variation attributes.
75819
No variation attributes.
75821
No variation attributes.
75835
No variation attributes.
Specifications
| Module Sizes | 4' (1200 mm) |
|---|---|
| Standard | 7" (180 mm) |
| LS | 4.5" (115 mm) |
| Features | No-hassle installation with few parts and complete step-by-step instructions; Safe service access - installation and maintenance work can be done safely from the sides of the conveyor; Quick adjustment using the locking wedges on the clamp pins; Anti-vibration pin ensures pin remains locked; LS (Limited Space) model available for restricted-space areas and for portable equipment; Pick-A-Length (PAL) PAK option for special or longer length requirements; Bolt-On PAL PAK available when welding is not an option |
| Installation | Skirt board and rubber not included; One Skirt Clamp includes two clamp plates (Standard or LS - Limited Space), two clamp pins, and one 4' (1.2 M) clamp bar; The Pick-A-Length (PAL) PAK contains 2 clamp plates and 2 clamp pins - you supply the clamp bar (1" x 1" x 1/8" angle) to your required length |